Joules of Available Energy: The Currency that Matters
India experienced its worst ever power outage last July when a series of grid failures, over two consecutive days, eventually plunged an estimated 600 million people ‚Äď half of the country’s population ‚Äď into darkness.
While this causes us to question the reliability of energy infrastructures, a bigger issue is how we account for the energy used in everything we build and use ‚Äď from the houses we live in to the products we buy, and the energy systems that create and power them. Everything around us has a lifetime of energy associated with its manufacturing, transportation, operation and reclamation. Particularly in the tech industry, where innovation and efficiency are expected, we must account for the lifetime energy associated with the things we build, and place a larger focus on how to get more from our products with less energy.
To get there, we need to introduce a key analytical component that’s currently missing when it comes to designing both physical and virtual products. We need to equip designers and engineers with additional tools that quantify a product or service based on the energy used over its lifetime. In light of social, economic and ecological trends, the unit of energy ‚Äď the ‚ÄúJoule‚ÄĚ ‚Äď must become the currency for the designer, not dollars and cents.
But we are getting ahead of ourselves. Success requires the engineering community to connect with today‚Äôs high school students to encourage them to embrace the fundamentals in sciences. As an example, a student trained in fundamental concepts will have a firm understanding of thermodynamic principles that quantify available energy ‚Äď the useful portion of energy – and be better prepared for the future resource-constrained world. Available energy, also called ‚Äúexergy,‚ÄĚ can be used as a metric, for example, to estimate how easily ‚Äď and most efficiently ‚Äď convert our existing natural resources (like coal or wind) into useful electricity. Likewise, it can also be used to determine available energy in waste products such as hot exhaust gases in factories or vehicles. Thankfully, these concepts can and are being taught in schools where a portion of students, such as those in advanced placement physics courses, are exposed to basics such as the second law of thermodynamics. It is also time the broader engineering society focused on these concepts once again. Indeed, in a world where Joules of available energy is the currency, old school is new school.
Accounting for the available energy required for extraction, manufacturing, waste mitigation, transportation, operation and end of life can provide strategic insights. For example, an analysis of a laptop computer may peg the cost at about nine gigajoules in lifetime available energy consumed ‚Äď or roughly 200 liters of diesel destroyed. The analysis identifies ‚Äúhot spots‚ÄĚ ‚Äď components such as the display that might require a lot of available energy across the lifecycle to manufacture and operate ‚Äď and enables the designer to tweak the product to reduce its lifetime available energy needs. Such analysis, conducted for everything at design time, can conserve available energy on a massive scale. This key concept became the motivation for our researchers at HP Laboratories to devise lifetime available energy tools that can provide large impacts across HP‚Äôs expansive reach ‚Äď from thousands of data centers to millions of printers and PCs.
One of my colleagues elegantly described the destruction of available energy as an hourglass with the grains of sand continually flowing from one half to the other. We cannot slow it down and, alas, we cannot refill it. Luckily for us, we have the potential ‚Äď in both knowledge and programs ‚Äď to slow the process by getting the most that we can out of every single grain of sand, or unit of available energy in our case. It is up to us to blaze a new trail for how to scale the available energy for the present generation while also leaving enough for future generations. And the time for action is now. The world cannot wait.
Chandrakant Patel is an HP Senior Fellow and the interim director of HP Labs, the industrial research lab that is the company’s central innovation-transfer organization. He is a pioneer in microprocessor and system thermo-mechanical architectures, end-to-end energy management in IT, and applications of sustainable IT ecosystem for a net positive environmental impact.
Stay Up-to-Date On Environmental Management, Energy & Sustainability News with EL's Free Daily Newsletter
Energy Manager News
- Bridgewater, MA, Gets $231,000 Efficiency Grant
- Biomass Group Studies Role in Clean Power Plan
- Rockleigh Borough Installing LEDs, Low Energy AC
- PHG to Build Big Gasification Plant for Sevier Solid Waste
- Energy Profile of Commercial Buildings Changing
- Smart Meter Market Surging
- Modular Data Centers Cut Construction Costs
- Failure to Build Energy Infrastructure Could Cost New England $5.4B