Tom’s of Maine Sustainability Report: Zero-Waste-to-Landfill Aim for 2020
The site, a de facto sustainability report, features details on the toiletry company’s 2011 benchmarking along with 2015 and 2020 goals covering waste production, carbon emissions, packaging and ingredients.
In 2011, Tom’s Sanford, Maine, manufacturing facility produced 90 kg of waste per ton of product. This figure was 5 percent less than in 2010, the report says. The company diverted just over half of its total waste from the manufacturing facility via reuse (26 percent) and recycling (25 percent) in 2011. By 2015, the company is aiming to reduce the waste production figure to 75kg of waste per ton of product, as it moves towards the 2020 goal.
Examples of waste reuse include a project by the company’s toothpaste tube supplier, which delivers empty tubes to the Sanford site in corrugated totes. Tom’s returns these totes to the supplier for repeated reuse. Examples of recycling include the company’s practice of compressing all of its stretch wrap, so that its recycler can sell the plastic into the recycling stream.
The Sanford facility is aiming to recycle or reuse 70 percent of its waste by 2020, compared to a 51 percent 2011 baseline, the report says. In August, the company partnered with recycling company TerraCycle to start a free recycling program, which accepts toothpaste tubes and caps, mouthwash bottles and caps, deodorant/antiperspirant containers, plastic soap wrappers and floss containers, regardless of brand.
The company is aiming to reduce its normalized water consumption by over 40 percent by 2020, from 4.3 cubic meters per ton of product in 2011 to 2.5 in 2020, with an interim 2015 goal of 3.2 cubic meters per ton of product.
Tom’s has tried using a clean-in-place system for its manufacturing equipment, recirculating water during a cleaning cycle to reduce overall water usage. However, this was not as effective as the company had hoped it would be, the report says.
Tom’s is aiming to cut its normalized carbon emissions by almost 33 percent between 2011 and 2020. In 2011, the company released 283 kg of CO2 per ton of product.
Currently the electricity used at the Sanford facility is 100 percent offset by Green-e Certified renewable energy credits from wind power. The comapny’s offices in Kennebunk, Maine, on the Mousam River, are partially powered by hydroelectricity.Â Tom’s is a member of theÂ EPA Green Power Partnership.
Moving to sensor-controlled fluorescent lighting in 2005 helped save Tom’s 250,000 kilowatt-hours of energy per year.
The company is also planning to cut normalized carbon emissions from its transportation by just over 20 percent by 2020, from 163 kg CO2 per ton of product delivered in 2011 to 130 kg per ton of product delivered in 2020. By 2015, the company is planning to reduce normalized emissions from transportation to 147 kg of CO2 per ton of product delivered.Â Tom’s says it is looking at how it can minimize energy used to move products from its manufacturing facility to distribution centers.
The company measures energy use in manufacturing and transportation. The next step is to understand and begin to reduce energy usage at its headquarters, which is in a leased space, the report says.
Tom’s says it gets all its animal-derived ingredients from cruelty-free sources and uses no artificial colors, flavors, fragrances or preservatives in its products. It is aiming to maintain these standards until at least 2020.
In June 2011, Tom’s was named as the third greenest brand by a survey of consumers. Seventh Generation and Whole Foods beat out Tom’s for the top two spots. Burt Bees came in fourth.
Stay Up-to-Date On Environmental Management, Energy & Sustainability News with EL's Free Daily Newsletter
Energy Manager News
- Con Edison Development Procures GE Energy Storage System
- Courthouse Replaces Oversized Boiler
- Indoor Farming Company Works on HVAC with PUE 1.0
- Toolkits Designed to Help Health Care Facilities Reduce Energy
- San Antonio Macyâ€™s Store Showcases Better Buildings Challenge Measures
- Natural Gas Gensets to Reach 27 GW of Installed Capacity by 2024
- Larson Releases a Solar Powered Generator with Manual Crank Mast
- Energy Efficiency in Food Service Businesses