If you've no account register here first time
User Name :
User Email :
Password :

Login Now
mobile emissions testing

Method Tested to Inspect Methane Emissions

mobile emissions testingA new mobile methane emissions inspection method called OTM 33A, developed by the EPA, was used to inspect oil and gas well pads during a study conducted by the agency in Texas, Colorado and Wyoming from 2010-2013, according to a report published in Environmental Science & Technology.

The results indicate that across the wells studied, there seem to be lower emissions at oil and gas well pads over time, and the larger emissions observed with OTM-33A are likely episodic and result from malfunctioning equipment and leaks.

In January the Obama Administration set a  goal to cut methane emissions from the oil and gas sector by 40-45 percent from 2012 levels by 2025.

 

 

6 Things to Consider When Deciding Whether to Build or Buy Software
Sponsored By: Progressly

  
Operationalizing EHS Management: Bridge the Gap from Strategy to Execution
Sponsored By: LNS Research

  
Planning for a Sustainable Future
Sponsored By: Dakota Software

  
Practical Guide to Transforming Energy Data into Better Buildings
Sponsored By: Lucid

  

One thought on “Method Tested to Inspect Methane Emissions

  1. So, continue to be less bad until 2025 and then be 40-45% less bad thereafter. What about being good from now? Try to eliminate emissions into atmosphere now…full stop!.

Leave a Comment