If you've no account register here first time
User Name :
User Email :
Password :

Login Now
Greyline DFS 5.1 Doppler Flow Switch

Switch Offers Flow Control from Outside a Pipe

Greyline DFS 5.1 Doppler Flow SwitchGreyline Instruments’ latest flow switch with a non-contacting sensor allows users to control flow from outside a pipe, the company says.

Greyline’s DFS 5.1 is designed for pump protection, valve control and flow/no-flow alarms. It is ideal to control wastewater, slurries, caustics, acids and “difficult” liquids, the company says.

The water-tight NEMA4X switch enclosure includes a 5 ampere DPDT control relay with adjustable on and off set point controls, adjustable time delay, flow rate bargraph and relay status LEDs. A sensor mounting kit is included with each switch and sensor cable can be extended up to 150 m.

The company says the flow switch is easy to calibrate. The DFS 5.1 control relay can be set to turn on and off at any flow rate between 0.25 and 10 feet/second (0.075 to 3 m/sec). Users can insert two links for separate on/off set points or just one link for a Hi or Lo flow alarm. The relay actuation time delay can be set from zero to 80 seconds.

A bright LED indicator shows the relay state and a LED bargraph shows the flow rate. Electronics are housed in a watertight polycarbonate wall-mount enclosure.

The clamp-on ultrasonic sensor mounts on the outside of metal or platic pipes without cutting the pipe or shutting down flow. It works on any pipe diameter ½ foot (12.5 mm) or larger and installs in minutes. There are no moving parts and no maintenance is required. The shielded sensor cable length is 20 feet (6 m) and can be extended up to 500 feet (152 m) with an optional junction box.

 

The Corporate Sustainability Professional's Guide to Better Data Management
Sponsored By: Urjanet

  
Financing Environmental Resiliency and a Low-Carbon Future with Green Bonds
Sponsored By: NSF International

  
Practical Guide to Transforming Energy Data into Better Buildings
Sponsored By: Lucid

  
Choosing the Correct Emission Control Technology
Sponsored By: Anguil Environmental Systems

  

Leave a Comment