If you've no account register here first time
User Name :
User Email :
Password :

Login Now
ATN 4 BK-PT

Air-Conditioning Recycling for Industrial Cooling

ATN 4 BK-PTATN Engineering has released its ATN 4 BK-PT, designed for the degassing of all types of industrial cooling devices.

With a condensing capacity of 60 KG refrigerant per hour, the company says it is the biggest machine of his kind. With the ATN 4 BK-PT, facilities can degas even quicker than the gas is able to evaporate. Extra heating units speed up the process of evaporation.

The machine also allows degassing the units in badges to reclaim the refrigerant as a mono-stream for reuse. By pushing a button on the display of the machine you can change the tank after the machine has emptied itself.

Up to four tanks on four weight scales can be connected to the machine, each for a specific type of refrigerant. Four drill-heads enables the operator to de-oil the compressor in the fastest possible way.

An operator is required to make the connection between the cooling device and the ATN 4 BK-PT. After the connection is established the machine takes over the control of the degassing cycle. The liquefied gas is conveyed into the designated tank. The cooling device will be vacuumed to reach the highest possible efficiency for the degassing, the company says.

For safety reasons the drill-head can only be used in combination with the piercing device or the service connections of the cooling device.

Just the Facts: 8 Popular Misconceptions about LEDs & Controls
Sponsored By: Digital Lumens

  
The EHS Guidebook: Selecting, Implementing, and Using EHS Software Solutions
Sponsored By: EtQ

  
Practical Guide to Transforming Energy Data into Better Buildings
Sponsored By: Lucid

  
Operationalizing EHS Management: Bridge the Gap from Strategy to Execution
Sponsored By: LNS Research

  

Leave a Comment