ASHARE Seeks Industry Input on Refrigerant Safety Standard

by | Dec 14, 2015

This article is included in these additional categories:

ASHRAE logoASHRAE is seeking industry input on a proposal to modify portions of its refrigeration safety standard to incorporate subclass 2L flammability classifications.

ANSI/ASHRAE Standard 15-2013, Safety Standard for Refrigeration Systems, specifies safe design, construction, installation and operation of refrigeration systems.

The 2010 edition of ANSI/ASHRAE Standard 34-2013, Designation and Safety Classification of Refrigerants, added an optional Subclass 2L to the existing Class 2 flammability classification of refrigerants. According to ASHRAE, this change was intended to separate single component and blended refrigerants that are difficult to ignite and sustain a flame, from other Class 2 (and Class 3) flammable refrigerants.

“The expectation was that some of the Class 2L refrigerants would be commercialized and used as substitutes for Class A1 refrigerants that are in use today,” says Dennis Dorman, chair of the Standard 15 committee. “In order to be broadly applied, Class 2L refrigerants would need to be treated more like Class 1 than Class 2 or Class 3.”

However, at the start of its deliberations, the committee discovered that there was almost no science to support rules changes of Class 2 requirements. In July 2011, a first public review of the proposed addendum was made available. Since that time, the committee has been addressing the technical issues identified from that review.

Because Standard 15 covers the full range of applications from residential to commercial to industrial applications, there is an unusual degree of complexity in considering appropriate rules for each. After much research and other activities, the committee has much of the technical information to support proposed rules changes to Standard 15.

“With this public review, we are seeking suggestions for new, unusual or potentially controversial elements of the proposed addendum, which the committee believes would benefit from increased public input prior to finalizing the draft for its first formal public review,” Dorman says. “Additionally we want to make sure that we do not overlook important safety aspects that may come from various users of the standard, both domestic and international.”

Addendum d to ANSI/ASHRAE Standard 15-2013 is open for public comment until Jan. 18, 2016.

Additional articles you will be interested in.

Stay Informed

Get E+E Leader Articles delivered via Newsletter right to your inbox!

This field is for validation purposes and should be left unchanged.
Share This